Huge storage tank coated in just 12 hours
When Oldelval, one of the leading midstream storage and transportation companies in Argentina, was performing scheduled maintenance on a pump station storage tank, it hit a problem. Delays earlier in the project meant the tank had to be completely recoated and back in service in just 72 hours.
In these videos, Oldelval and the applicator explain how they did it, using Hempel’s fast-cure tank lining Hempaline Defend 630.
The owners perspective:
Rapid maintenance without service interruptions
With many contractors involved, delays had already occurred earlier in the project. Working side by side with Oldelval, both the coating applicator and Hempel came up with a solution that would get the project back on track.
Our solution was Hempaline Defend 630. Offering exceptional long-term performance, Hempaline Defend 630 will extend the tank’s expected lifetime beyond its original specification. Importantly for Oldelval, it can also be applied in 12 hours and after being coated, the tank could be back in service less than 72 hours after the coating was applied.
In the video, Oldelval’s Javier Ibañez explains how the team met its objectives.
Thanks to Hempaline Defend 630 we could achieve the target dates and the protection needed for the tankJavier Ibañez, Oldelval
The applicator’s perspective:
Fast application with no defects
Hempaline Defend 630 was the perfect solution. Working with conventional airless sprays, the Fenix team was able to apply Hempaline Defend 630 at the required DFTs in a single layer, with almost no defects. And, as the coating is solvent-free, the team could work for long periods despite the enclosed work site. As a result, Fenix’s team manged to coat 1,900 m2 in a single day – in keeping with the tight schedule.
In the video, Mario Brizuela from Fenix explains how his team did it.
Our services
Hempel Service: For speed, quality and long-term performance
A global coating supplier with over 100 years of experience, Hempel has offices, stock points, factories and service teams near key oil & gas locations around the world – ensuring fast delivery and timely onsite support.
Working closely with Oldelval and Fenix, we specified a coating solution the addressed the specific needs of the project. In addition, our Service team worked with Fenix’s applicators from start finish to ensure a fast, efficient and high-quality application, with minimal waste and costs.
In the video, Claudio Schmidt from Hempel explains the benefits of this service to Oldelval.