Get more blades painted in one shift
The wind industry faces demand to increase profitability and your blades are key to meeting the challenge. Damaged or eroded blades cause poor aerodynamics which in turn leads to reduced Annual Energy Production (AEP), shorter service intervals and increased maintenance costs.
As it is expected that the offshore MW installation capacity of wind turbines will increase from 12% in 2022 to 27% in 2028*, and with blades that keep getting bigger, blade and leading edge protection becomes crucial for making wind turbine investments profitable.
*Source: Orr & Boss | Wood Mackenzie.
As it is expected that the offshore MW installation capacity of wind turbines will increase from 12% in 2022 to 27% in 2028*, and with blades that keep getting bigger, blade and leading edge protection becomes crucial for making wind turbine investments profitable.
*Source: Orr & Boss | Wood Mackenzie.
Increase blade performance with Power of Less
The Hempablade range of coatings is a best-in-class full system solution for blades and LEP that delivers better protection and performance with less material, waste and work.

Straightforward, efficient application
Hempablade is more efficient to apply. Its simple 1-2 layer format reduces putty process costs by up to 30% and its easy-sanding properties improve productivity with fewer HSE concerns.
The 2-step top coat eliminates the need for a third operator reducing the manpower cost of 30%.
The 2-step top coat eliminates the need for a third operator reducing the manpower cost of 30%.

Boost turbine performance
Choosing Hempablade improves AEP and extends time between maintenance intervals while reducing associated costs and increasing overall turbine uptime.
The coating is applied in a thin layer and is well-tapered to the blade surface, while its low DFT properties reduce the impact on the blade’s AEP performance.
The coating is applied in a thin layer and is well-tapered to the blade surface, while its low DFT properties reduce the impact on the blade’s AEP performance.

The sustainable choice
Hempabalde Putty 111 delivers a significant reduction of 75% in application waste when compared to the estimated 10-15% waste levels of other low-viscosity fillers.
The Hempablade coating system
-
Hempablade Putty 111A fast-curing, solvent-free and light-weight 2-component polyurethane putty that can be used to form edge profiles and fill defects on the surface of the wind turbine’s blade prior to finishing coatings or LEP. It offers a combination of a good mechanical properties, easy application and high-build capabilities.
-
Hempablade Pore 141A fast-curing, solvent-free, polyaspartic-based porefiller with excellent self properties that can be used to fill pinholes in substrates.
-
Hempablade Final 151A high performance, fast-curing, two-component waterborne polyurethane topcoat for wind turbine blades.
-
Hempablade Final 161Hempablade Final 161 is a high performance two-component polyaspartic based top coat for coating wind power plants in wind turbine blades.
-
Hempablade Edge 171A fast-curing top-layer designed to provide best-in-class erosion protection of the leading edge on wind turbine blades. Possibly the easiest application process for any LEP system available.
-
Hempablade Edge 172Hempablade Edge 172 is a fast cure high build top-layer designed to provide exceptional erosion protection of the leading edge on wind turbine rotor blades.
Benefit from our in-house Rain Erosion Test facility
At Hempel, we have our own in-house DNV GL RP-0171 compliant RET facility. And we’ve put Hempablade Edge to the test in more than 900 exhaustive test sessions and assessments. This not only ensured the optimisation of its development and the LEP validation process, but it also means you can be sure it is proven to protect against rain erosion in the toughest conditions.
These rigorous tests culminated in a product that extends the intervals between scheduled maintenance, resulting in more turbine uptime and reduced operational costs.

Strengthen your wind blades projects with Hempel expertise
By partnering with Hempel for wind turbine blade coatings, you get solution and support that embody sustainability and efficiency. Our low-VOC solutions are supported by a global network of R&D excellence and industry expertise since 1980, ensuring your wind energy projects benefit from coatings with proven performance.
Our ‘Power of Less’ philosophy means you get more than just advanced coatings - you access a partnership that offers dedicated support, proven solutions, and a commitment to reducing environmental impact.
Our ‘Power of Less’ philosophy means you get more than just advanced coatings - you access a partnership that offers dedicated support, proven solutions, and a commitment to reducing environmental impact.