[Skip to Content]
Countries

Find local office

Visit local website

Product List

Products listed below are global products. For local assortments please, visit our local websites.

Hempel's Classic Varnish 01150

is a traditional clear alkyd varnish containing tung oil resulting in a flexible, long lasting finish.

Hempadur Sealer 05990

is a low viscosity, two pack epoxy varnish with good penetration properties.

Hempaline Prepare 120

is a two-component vinyl ester primer.

Hempalin Primer 12050

is a relatively quick-drying, zinc phosphate primer.

Hempel's Uni-Primer 13140

is a quick-drying, one-component primer with rust-inhibiting pigments.

Hempalin Primer Hi-Build 13200

is a quick-drying, urethane-modified alkyd primer.

Hempel's Primer Undercoat 13201

is a quick drying, high opacity primer and undercoat.

Hempel's Shopprimer E 15275

is a two-component epoxy polyamide shopprimer, pigmented with zinc phosphate rust-inhibiting pigments.

Hempadur Primer 1530C

is a two-component epoxy primer or mid-coat containing zinc phosphate as corrosion inhibiting pigment. It cures to a strong and rust-preventing coating.

Hempadur 15460

is a high solids amine adduct cured pure epoxy tank coating resistant to continuous immersion in a range of chemicals, including crude oil up to 80ºC/176ºF.

Hempadur 15500

is a two-component, amine adduct cured phenolic epoxy (novolac) paint.

Hempadur 15553

is a two-component epoxy paint. It cures to a flexible, well adhering coating with good abrasion and impact resistance. Contains zinc phosphate. Cures down to -10°C/14°F.

Hempadur 15570

is a two component, polyamide-adduct cured epoxy paint, which cures to a strong and highly corrosion resistant coating, at temperatures down to -10°C/14°F.

Hempadur 15590

is a two-component epoxy primer coating especially for use on surfaces exposed to severe abrasion.

Hempadur 15600

is a two-component, amine adduct cured pure epoxy paint with excellent adhesion to steel, resistance to crude oil and most refined oil products.

Hempel's Galvosil 15700

is a two-component, solvent-borne, self-curing, inorganic zinc silicate with outstanding resistance against weathering and abrasion.

Hempel's Galvosil 15702

is a two-component, solvent-borne, self-curing, inorganic zinc silicate with outstanding resistance against weathering and abrasion.

Hempel's Galvosil Fibre 15750

is a two-component, solvent-borne, self-curing, inorganic zinc silicate with outstanding resistance against weathering and abrasion.

Hempe's Galvosil 15780

is a two-component, medium-zinc, solvent-borne, selfcuring inorganic zinc silicate coating. Applicable by airless spray.

Hempel's Shopprimer ZS 15890

is a two-component, solvent-borne zinc ethyl silicate shopprimer, designed for automatic spray application.

Hempel's Zinc Primer 16490

is an one-component, high molecular weight, quick drying, phenoxy coating with a high content of zinc.

Hempaline Defend 740

is a two-component, sprayable high performance novolac glass flake vinyl ester tank lining.

Hempaline Defend 500

is a two-component, sprayable high performance acid resistant flake filled vinyl ester tank lining.

Hempaline Defend 560

is a two-component high performance glass flake vinyl ester lining with excellent resistance to organic and inorganic acid solutions.

Hempaline Defend 570

is a heavy duty glass fibre reinforced vinyl ester lining system.

Hempadur Avantguard 550

is a two-component, activated zinc epoxy primer in compliance with the requirements for Level 3, type II in SSPC Paint 20, 2002.

Hempadur Zinc 17360

A two-component, zinc rich epoxy primer. It cures to a hard wearing and highly weather-resistant coating. Offers cathodic protection of local mechanical damage.

Hempadur Avantguard 750

is a two-component, activated zinc epoxy primer in compliance with the requirements in ISO 12944 Part 5, 2007 and Level 2, type II in SSPC Paint 20, 2002.

Hempadur Avantguard 770

is a two-component, activated zinc-rich epoxy primer in compliance with the requirements in ISO 12944 Part 5, 2007 and Level 2, type II in SSPC Paint 20, 2002.

Hempadur Avantguard 770

is a two-component, activated zinc-rich epoxy primer in compliance with the requirements in ISO 12944 Part 5, 2007 and Level 2, type II in SSPC Paint 20, 2002.

Hempadur Fast Dry 17410

is a two-component, high build epoxy paint which combines a relatively high volume solids content with a short drying time.

Hempadur Quattro 17634

is a two-component universal epoxy paint, which cures to a hard and tough coating with good resistance to abrasion, seawater and various oils.

Hempadur Quattro XO 17720

is a PSPC qualified, two-component, pure epoxy universal primer with excellent abrasion resistant and anticorrosive properties.

Hempadur Quattro XO 17770

is a PSPC qualified, two-component, pure epoxy universal primer with extended overcoat interval, excellent abrasion resistant and anticorrosive properties.

Hempadur Quattro XO 17820

is a PSPC qualified, two-component, pure epoxy universal primer with 80% solid volume, excellent abrasion resistant and anticorrosive properties.

Hempadur Quattro XO 17870

is a PSPC qualified, two-component, pure epoxy universal primer with 80% solid volume, extended overcoat interval, excellent abrasion resistant and anticorrosive properties.

Hempaprime Immerse 900

is a two-component, pure epoxy universal primer, which cures to a smooth, hard and tough coating with excellent resistance to seawater and abrasion.

Hempadur Avantguard 860

is a unique combination of superior anti-corrosion protection and best-in-class application properties

Hempadur Avantguard 860

is a unique combination of superior anti-corrosion protection and best-in-class application properties

Hempaprime Shield 700 HS1

is a two component polyamide cured, high solids epoxy primer. Offers excellent resistance to corrosion and exceptional adhesion to ferrous substrates

Hemucryl Primer Hi-Build 18032

is a water-borne, acrylic dispersion paint with good anticorrosive properties. Especially suited for application by airless spray.

Hemudur 18500

is a water-borne two-component polyamine cured epoxy primer containing zinc phosphate as corrosion inhibiting pigment. It cures to a strong and rust-preventing coat.

Hempel's Underwater Primer 26030

is a physically drying paint dissolved in mineral spirit and pigmented with aluminium flakes.

Hempel's Nexus II 27400

is a three component silicone based tiecoat with anticorrosive properties.

Hempasil Nexus X-Tend 27500

is a high solid one component silicone based tiecoat for repair and touch-up areas of existing fouling release systems.

Hempasil Nexus X-Line 27700

is a two component silicone based tiecoat for repair and touch-up areas of existing fouling release systems.

Hempel's Epoxy Filler 35250

is a two-component, solvent-free, epoxy filler, which when fully cured - is resistant to water, aliphatic hydrocarbons, and related products.

Hempadur Multi-Mil 35430

is a high-build, high solids, two-component, epoxy paint.

Hempadur Spray-Guard 35490

is a solvent-free, two-component, epoxy coating. It cures to a hard, tough and well adhering protective coating.

Hempadur Spray-Guard 35493

is a solvent-free, two-component, epoxy coating. It cures to a hard, tough and well adhering protective coating.

Hempadur 35560

is a solvent-free, two-component, high-build, polyamine adduct cured epoxy paint, which cures to a coating with good resistance to fresh water.

Hempadur EM 35740

is a two-component, ultra high solids and very low VOC epoxy coating. It has good self priming properties and is suited for application even under humid conditions and on marginally prepared surfaces.

Hempadur Multi-Strength 35840

is a solvent-free, two-component, high-build, polyamine adduct cured glass flake containing epoxy paint, which cures to a hard and tough coating with good resistance to abrasion, seawater and fresh water.

Hempadur Multi-Strength 35842

is a two-component, high-build, polyamine adduct cured epoxy paint, reinforced with glassflakes, which cures to a hard and tough coating with good resistance to abrasion, seawater and fresh water.

Hempadur Multi-Strength GF 35870

is an amine-adduct cured epoxy coating - the product is reinforced with Glassflakes.

Hempel's Vinyl Ester GF 35910

is a two component cold cured vinyl ester/acrylic copolymer, reinforced with glass flakes. Applicable in thick coats by standard heavy duty airless spray equipment.

Hempaline Defend 400

is a solvent free, high performance epoxy lining with very good chemical resistance.

Hempaline Defend 400 37811

is a solvent free, high performance epoxy lining with very good chemical resistance.

Hempaline Defend 630

is a solvent free high performance Epoxy Phenolic Lining with excellent chemical resistance to a wide range of chemicals and solvents.

Hempaline Defend 630 37821

is a solvent free high performance Epoxy Phenolic Lining with excellent chemical resistance to a wide range of chemicals and solvents.

Hempafire Pro 315

is a one component, solvent-borne, intumescent coating for passive fire protection of structural steel against cellulosic fires. It is suitable for in-shop and onsite applications.

Hempafire Pro 315 Fast Dry

is a one component, solvent-borne, intumescent coating for passive fire protection of structural steel against cellulosic fires. It is suitable for inshop and on-site applications.

Hempacore One 43600

is a one component, solvent-borne, physically drying intumescent coating for passive fire protection of structural steel against cellulosic fires.

Hempacore One FD 43601

is a fast drying one component, solvent-borne, physically drying intumescent coating for passive fire protection of structural steel against cellulosic fires.

Hempadur 45141

is a two-component, polyamide adduct cured epoxy paint with good wetting properties and low water permeability. Hempadur 45141 is intended for use in warmer climates.

Hempadur 45143

is a two-component, polyamide adduct cured epoxy paint with good wetting properties and low water permeability.

Hempadur 45182

is a two-component, low-temperature curing, modified polyamide adduct cured epoxy.

Hempadur Fast Dry 45410

is a two-copmponent, high solid epoxy paint. Pitgmented with zinc phosphate.

Hempel's Silic Seal 45441

is a two component epoxy to enable easy conversion from antifouling to Hempel’s Silic One Fouling Release System.

Hempel's Light Primer 45551

is a two-component polyamide adduct cured epoxy high build paint.

Hempel's Light Primer Spray 455EX

is a two-component epoxy paint. It forms a hard and tough surface.

Hempadur Quattro ALU 45604

is a two-component aluminium pigmented universal epoxy paint, which cures to a hard and tough coating with superior anticorrosive properties and good resistance to abrasion, seawater and various oils.

Hempadur Multi-Strength 45701

is a self-priming, two-component, highbuild, aluminium pigmented pure epoxy paint which cures to an abrasion and corrosion resistant coating.

Hempadur Multi-Strength 45703

is a self-priming, two-component, highbuild, aluminium pigmented pure epoxy paint which cures to an abrasion and corrosion resistant coating.

Hempadur Multi-Strength 45751

is a self-priming, two-component, highbuild, epoxy-polyamide/amine paint which cures to an abrasion and corrosion resistant coating. Hempadur Multi-Strength 45751 is intended for use in warm climates.

Hempadur Multi-Strength 45753

is a self-priming, two-component, highbuild, epoxy-polyamide/amine paint which cures to an abrasion and corrosion resistant coating. Hempadur Multi-Strength 45753 is intended for use in cold climates.

Hempadur Mastic 45880

is a two-component polyamide adduct cured, high solids, high build epoxy paint.

Hempadur Mastic 45881

is a two-component polyamide adduct cured, high solids, high build epoxy paint.

Hempadur Mastic 4588W

is a two-component high solids, high build epoxy paint. It forms a hard and tough coating, has good wetting properties and low temperature curing.

Hempaprime Multi 500 Summer

is a two-component, fast drying, high-solids epoxy paint. It provides hard wearing and long lasting barrier protection in coating systems for severe corrosive environments. Use it as intermediate, when fast drying is a requirement. The summer version is suited for application down to 10°C/50°

Hempaprime Multi 500 Winter

is recommended as a high-build, intermediate coat and is a two-component, fast drying high-solids epoxy paint. Due to its fast curing time, the product is excellent for projects where productivity is key. Can be used direct-to-metal and as topcoat in heavy-duty systems. The winter version is suited for application down to -10°C/14°F.

Hempatex Hi-Build 46410

is a physically drying paint with good colourretention as a flat finish. Based on acrylic resin and non-chlorinated plasticizer.

Hempadur OBM 47150

is a two-component, high build epoxy paint.

Hempadur 47182

is an anti-corrosive two-component, modified polyamide adduct cured epoxy used as a tie-coat between epoxy and physically drying coatings.

Hempadur Ultra-Strength Fibre 47510

is a self-priming, two-component, high build, pure epoxy paint reinforced with patented Fibre technology.

Hempadur Easy 47700

is a two-component high build pure epoxy paint which cures to a hard and tough coating with good resistance to abrasion and sea water.

Hempadur 4774D

is a self-priming, two-component, high-build, pure epoxy paint, polyamide/amine cured which is abrasion and corrosion resistant.

Hempadur Impact 47800

is a high-performance epoxy cargo hold coating offering strong protection against abrasion, impact and corrosion.

Hempafire Pool 200

is a two-component epoxy based intumescent coating that provides passive fire protection of structural steel against hydrocarbon fires

Hempacore AQ

is an one-component water-borne, chlorine free, physically drying intumescent coating

Hempel's Multicoat 51120

is an alkyd based enamel which forms a weather resistant coating. It has a good brush-ability and is resistant to sunlight, salt water, spillage of mineral oil.

Hempel's Silvium 51570

is an oleoresinous general purpose aluminium paint with good light reflection.

Hempalin Enamel 52140

is a glossy alkyd enamel which forms a weather resistant coating.

Hempalin Enamel 52144

is a glossy alkyd enamel which forms a weather resistant coating.

Hempel's Brilliant Gloss 53200

is a modified alkyd enamel with high gloss and excellent colour retention.

Hempaxane Light 55030

is a two-component, high-solids, high-gloss, polysiloxane enamel with excellent gloss and colour retention.

Hempel's Polyenamel 55102

is a two-component, high-gloss acrylic polyurethane enamel cured with aliphatic isocyanate, with good gloss and colour retention.

Hempathane Topcoat 55210

is a two-component, glossy acrylic polyurethane coating, cured with aliphatic isocyanate, with good gloss and colour retention.

Hempathane Topcoat 55214

is a two-component glossy acrylic polyurethane coating with good gloss and colour retention.

Hempatop Repel 800 55540

is a two component advanced water repellent polyurethane coating.

Hempathane HS 55610

is a two-component polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and colour retention.

Hempahane HS 55613

is a two-component semi-gloss acrylic

Hempathane HS 5561B

is a two-component polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and colour retention.

Hempel's Pro Acrylic 55880

is a two-component, isocyanate-free, acrylic finishing coat with good gloss and colour retention.

HEMPEL's PRO ACRYLIC 55883

is a two-component, isocyanate-free, acrylic finishing coat with good gloss and colour retention.

Hempathane 55930

is a two-component, high-gloss polyurethane enamel

Hempatop Finish 850 MS1

is a two component, high performance polyurethane topcoat formulated for spray usage. It offers a high quality appearance with excellent color and gloss retention, as well as exceptional chemical resistance.

Hempel's Non-Slip Deck Coating 56251

is a quick-drying acrylic paint, containing an anit-slip aggregate.

Hempatex Enamel 56360

is a finishing coat based on acrylic resin and nonchlorinated plasticizer for optimum gloss and colour retention.

Hempel's Hi-Vee 56540

is a non-hiding, but strongly day-light reflecting acrylic paint with fluorescent pigments which give intense colour impression and high visibility (Hivee).

Hempel's Silicone Aluminium 56913

is a heat resistant aluminium pigmented polysiloxane paint

Hempel's Silicone Aluminium 56914

is a heat resistant aluminium pigmented polysiloxane paint.

Hempel's Silicone Acrylic 56940

is a heat resistant acrylic modified polysiloxane paint.

Versiline CUI 56990

is a MIO pigmented single component inorganic copolymer coating which cures to form an inert polymer matrix able to resist temperatures up to 650°C/1202°F and thermal shock/cycling in dry or dry/wet service.

Hempatop Finish 850 HS1

is a two component, high performance polyurethane topcoat formulated for spray usage in areas requiring VOC less than 2.8lbs/US gallon. It offers a high quality appearance with exceptional color and gloss retention, as well as exceptional chemical resistance.

HEMUTHANE ENAMEL 58510

A waterborne, two component polyurethane enamel with execllent gloss and colour retention. Easy to clean.

Hempel's Anti-Slip Pearls 67420

are hollow, aluminium silicate spheres (“glass pearls”) of diameters between 5 and 300 micron.

Hempel's Teak Colour Restorer 67462

is a pigmented wood oil containing antimould agents to prevent discolouration.

Hempel's Anti-Slint 67500

is flame dried silica sand of which the average particle size is approximately 0.5 millimetres.

Hempel's Gelcoat Cleaning Powder 67536

is a strong, fine abrasive cleaning powder for tough stains.

Hempel's Unifiller 67583

is a quick drying styrene alkyd based filler.

Hempel's Pre-Clean 67602

is a high strength cleaner and degreaser.

Hempel's Clean and Shine Spray 69002

is a concentrated wash and wax that cleans and leaves a protective coating in one application. The water hose connector makes the product very easy to use and allows the controlled mix ratio of water and Hempel's Clean & Shine Spray 69002.

Hempel's Clean and Shine 69003

is a concentrated wash and wax that cleans and leaves a protective film in one application.

Hempel's Gelcoat Cleaning Spray 69007

is an easy to use, foaming cleaner spray. For gelcoat painted surfaces.

Hempel's Gelocoat Cleaning Gel 69017

is a strong, high efficient, non-abrasive cleaning gel.

Hempel's Textile Clean 69020

is a concentrated liquid cleaner and degreaser.

Hempel's Barnacle Remover 69027

is an acid containing product for easy removal of barnacles by dissolving them.

Hempel's Vinyl Shine 69031

is an easy to use liquid gel, to condition and leave a protective layer on external and internal vinyl and rubber surfaces.

Hempel's Wax 69033

is a liquid wax for UV protection and a high gloss durable finish.

Hempel's Wax Telcel 69034

is a high performance liquid wax with TecCel technology.

Hempel's Anti Slip Pearls 69070

is a mixture of particles of linear low density polyethylene. Mix with paint for an anti-slip finish.

Hempel's Hard Racing 7142H

is a hard antifouling (insoluble matrix) based on cuprous oxide.

Hempel's Prop-AF 712EX

is a self polishing antifouling with organic bioactive material.

Hempel's Mille Xtra 7166A

is a high performance, self-polishing antifouling providing excellent protection all season.

Hempel's Mille Standard 7175A

is a high performance, self-polishing antifouling providing excellent protection all season.

Hempel's Mille NCT 71880

is a high performance, self-polishing antifouling.

Hempel's Mille NCT 7188W

is high performance, self-polishing antifouling. Hempel's patented binder technology ensures outstanding fouling protection and colour retention all season.

Hempel's Antifouling Basic 71950

is a high solids selfpolishing antifouling based on acrylic binders.

Hempel's Antifouling Olympic+ 72950

is a reliable rosin-based antifouling for protection in not overly aggressive fouling conditions.

Hempel's Antifouling Atlantic + 73850

is a high solids selfpolishing antifouling based on acrylic binders. The robust rosin technology combined with a good biocide package ensure predictable antifouling protection.

Hempel’s Antifouling Oceanic+ 73902

is a high solids SPC antifouling based on zinc carboxylate and acrylic binders.

Hempel’s Antifouling Oceanic+ 73952

is a high solids SPC antifouling based on zinc carboxylate and acrylic binders.

Hempel's Antifouling Globic 6000 75950

is a high solids chemically hydrolysing SPC antifouling based on Nano Acrylate Technology.

Hempel's Hard Racing 7668E

is a high performance, hard antifouling providing excellent fouling protection and smooth racing finish all season.

Hempel's Hard Racing TecCel 7683A

is a high performance, hard antifouling providing outstanding protection all season.

Hempel's Hard Racing Teccel 76890

is a high performance, hard antifouling providing outstanding protection all season.

Hempasil 77300

is a biocide free, two component, silicone fouling release coating with a high solids content.

Hempel’s Antifouling Globic 7000 78350

is a high solids chemically hydrolysing SPC antifouling based on Nano Acrylate Technology (NAT).

Hempel's Antifouling Globic 8000

is a top tier high solids chemically hydrolysing SPC antifouling based on Nano Acrylate Technology (NAT).

Hempel's Antifouling Globic 9000 78900

is a premium antifouling coating for up to 90 months in aggressive waters.

Hempel's Antifouling Globic 9000 78950

is a premium antifouling coating for up to 90 months in aggressive waters.

Hempel's Antifouling Globic 9500 M

is a premium high solids chemically hydrolysing SPC antifouling based on Nano Acrylate Technology.

Hempel's Antifouling Globic 9500 S 7895S

is a premium high solids chemically hydrolysing antifouling based on Nano Acrylate Technology.

Hempel's Antifouling Dynamic 8000

is a top tier high solids chemically hydrolysing SPC antifouling based on Silylated Acrylate Technology.

Hempel's Antifouling Dynamic 9000 79900

is a premium high solids chemically hydrolysing SPC antifouling based on Silyl Acrylate Technology.

Hempel's Antifouling Dynamic 9000 79950

is a premium high solids chemically hydrolysing SPC antifouling based on Silylated Acrylate Technology.

Hempadur 85671

is a two-component, amine adduct cured phenolic epoxy (novolac) coating.

Hempasil X3+

is a third generation fouling release coating with high solids content.

Hempaguard X5 89700

is a cost effective fouling defence coating for docking intervals of 36 months. The combination of low friction and effective biocide makes it suitable for any trading pattern as well as extended idle time for the vertical sides and flat bottom of most ship types.

Hempaguard X7 89900

is a cost effective fouling defence coating for docking intervals of 90 months. The combination of low friction and effective biocide makes it suitable for any trading pattern as well as extended idle time for the vertical sides and flat bottom of most ship types.

Hempaguard X8

is an advanced fouling defence coating based on ActiGuard® technology which utilizes the added effect of advanced hydrogel silicone and an efficient fouling preventing biocide to boost the antifouling barrier, prolong the fouling free period and minimize hull roughness. Hempaguard X8, as part of the Hempaguard MaX system, possesses a very high fuel saving potential and is also suitable for vessels operating with long service intervals (up to 90 months) and/or very long idle periods (up to 120 days). Hempaguard X8 is an advanced fouling defence coating, based on silicone, with high solids content.

Hempel's Rib Cleaner 99351

is a powerful, concentrated solvent-free cleaner and degreaser.

Contact

For further information, please contact us at

Product finder

Explanatory Notes to Product data Sheets

Our product data sheets comprise descriptions of the products, product data, and guidelines / recommendations for their use.

Read More

Download