HEMPADUR 15400 is a two-component, amine adduct cured epoxy paint, which cures to a coating with excellent resistance to a wide range of chemicals as tabulated in separate CARGO PROTECTION GUIDE.

HEMPADUR 15500 is a two-component, amine adduct cured phenolic epoxy (novolac) paint.

HEMPADUR 15553 is a two-component epoxy paint. It cures to a flexible, well adhering coating with good abrasion and impact resistance. Contains zinc phosphate. Cures down to -10°C/14°F.

HEMPADUR 15570 is a two component, polyamide-adduct cured epoxy paint, which cures to a strong and highly corrosion resistant coating, at temperatures down to -10°C/14°F.

HEMPADUR 15590 is a two-component epoxy primer coating especially for use on surfaces exposed to severe abrasion.

HEMPADUR 17630 is intended for use in temperate to warm climates.

HEMPADUR 17633 is intended for use in cold/temperate climates.

HEMPADUR 35560 is a solvent-free, two-component, high-build, polyamine adduct cured epoxy paint, which cures to a coating with good resistance to fresh water.

HEMPADUR 35600 is a solvent-free, two-component, high-build, polyamine cured epoxy paint, which cures to a coating with good resistance to fresh water.

HEMPADUR 35760 is a solvent-free, two-component, high-build phenolic epoxy (novolac) paint, which cures to a durable tank lining with very high corrosion protection properties and excellent chemical resistance.

HEMPADUR 45141/45143 is a two-component, polyamide adduct cured epoxy paint with good wetting properties and low water permeability. HEMPADUR 45141 is intended for use in warmer climates.

HEMPADUR 45141/45143 is a two-component, polyamide adduct cured epoxy paint with good wetting properties and low water permeability. HEMPADUR 45143 is intended for use in cold/temperate climates.

HEMPADUR 45182 is a two-component, low-temperature curing, modified polyamide adduct cured epoxy.

HEMPADUR HI-BUILD 45200 is a two-component, high build epoxy paint.

HEMPADUR 47080 is a high-build, modified, two-component epoxy paint, which cures to a coating with good resistance to water, splashes of mineral oils, aliphatic hydrocarbons, and to abrasion and impact.

HEMPADUR 47140 is a two-component polyamide adducts cured, high build epoxy paint which combines a relatively high volume solids content with a short drying time.

HEMPADUR 47200 is a two-component, polyamine adduct cured epoxy paint with a very short drying time. Contains micaceous iron oxide and zinc phosphate.

HEMPADUR 85531 is an amine-adduct, cured epoxy coating. It is a hard, impact and abrasion resistant coating eg for exterior pipelines.

HEMPADUR 85671 is a two-component, amine adduct cured phenolic epoxy (novolac) coating with very good adhesion and high temperature, water and chemical resistance.

HEMPADUR 87540 is an amine-cured, solvent-free epoxy paint which cures to a very strong and hard coating.

HEMPADUR EM 35740 is a two-component, ultra high solids and very low VOC epoxy coating. It has good self priming properties and is suited for application even under humid conditions and on marginally prepared surfaces.

HEMPEL’S EPOXY ADHESIVE 05674 is a two-component polyamine adduct cured epoxy glue.

HEMPADUR FAST DRY 15560 is a two-component epoxy paint with a very short drying time. Contains zinc phosphate.

HEMPADUR FAST DRY 17410 is a two-component, high build epoxy paint which combines a relatively high volume solids content with a short drying time. Contains zinc phosphate.

HEMPADUR FAST DRY 45410 is a two-copmponent, high solid epoxy paint. Pitgmented with zinc phosphate.

HEMPADUR GLASS FLAKE 35851/35853 is a two-component, high solids, glass flake pigmented polyamide/amine cured epoxy paint with good wetting properties and low water permeability.

HEMPADUR GLASS FLAKE 35851/35853 is a two-component, high solids, glass flake pigmented polyamide/amine cured epoxy paint with good wetting properties and low water permeability.

HEMPADUR HI-BUILD 4520C is a two-component, high build epoxy paint.

HEMPADUR MASTIC 45880/45881 is a two-component polyamide adduct cured, high solids, high build epoxy paint.

HEMPADUR MASTIC 45880/45881 is a two-component polyamide adduct cured, high solids, high build epoxy paint.

HEMPADUR MULTI-STRENGTH 35530 is a solvent-free, two-component, high-build, polyamine cured epoxy paint, which cures to a coating with good resistance to fresh water, sea water, crude oil, and to abrasion.

HEMPADUR MULTI-STRENGTH 45540 is an amine-adduct cured epoxy coating.

HEMPADUR MULTI-STRENGTH 45701/45703 is a self-priming, two-component, highbuild, aluminium pigmented pure epoxy paint which cures to an abrasion and corrosion resistant coating.

HEMPADUR MULTI-STRENGTH 45701/45703 is a self-priming, two-component, highbuild, aluminium pigmented pure epoxy paint which cures to an abrasion and corrosion resistant coating.

HEMPADUR MULTI-STRENGTH 45751/45753 is a self-priming, two-component, highbuild, epoxy-polyamide/amine paint which cures to an abrasion and corrosion resistant coating. HEMPADUR MULTI-STRENGTH 45751 is intended for use in warm climates.

HEMPADUR MULTI-STRENGTH 45751/45753 is a self-priming, two-component, highbuild, epoxy-polyamide/amine paint which cures to an abrasion and corrosion resistant coating. HEMPADUR MULTI-STRENGTH 45753 is intended for use in cold climates.

HEMPADUR MULTI-STRENGTH GF 35870 is an amine-adduct cured epoxy coating - the product is reinforced with Glassflakes.

HEMPADUR PRIMER 15300 is a two-component epoxy primer containing zinc phosphate as corrosion inhibiting pigment. It cures to a strong and rustpreventing coating.

HEMPADUR PRIMER 1530C is a two-component epoxy primer containing zinc phosphate as corrosion inhibiting pigment. It cures to a strong and rust-preventing coating.

HEMPADUR PRO ZINC 17380 is a two-component, zinc rich epoxy primer. Offers cathodic protection of local mechanical damage.

HEMPADUR QUATTRO 17634 is a two-component universal epoxy paint, which cures to a hard and tough coating with good resistance to abrasion, seawater and various oils.

HEMPADUR QUATTRO ALU 45604 is a two-component aluminium pigmented universal epoxy paint, which cures to a hard and tough coating with superior anticorrosive properties and good resistance to abrasion, seawater and various oils.

HEMPADUR QUATTRO FIBRE 47604 is a two-component aluminium pigmented universal epoxy paint with synthetic mineral fibres, which cures to a hard, tough and abrasion resistant coating with superior anticorrosive properties, good resistance to seawater and various oils and significantly improved crack resistance.

HEMPADUR SEALER 05990 is a low viscosity, two pack epoxy varnish with good penetration properties.

HEMPADUR SPRAY-GUARD 35490/35493 is a solvent-free, two-component, epoxy coating. It cures to a hard, tough and well adhering protective coating.

HEMPADUR SPRAY-GUARD 35490/35493 is a solvent-free, two-component, epoxy coating. It cures to a hard, tough and well adhering protective coating.

HEMPADUR ULTRA-STRENGTH 47500 is a self-priming, two-component, high-build, pure epoxy-polyamine paint which cures to a very abrasion, impact and corrosion resistant coating.

HEMPADUR UNIQ 47741/47743 is a self-priming, two-component, high-build, pure epoxy paint, polyamide/amine cured. HEMPADUR UNIQ 47741 is intended for use in warm climates above 10°C/50°F.

HEMPADUR UNIQ 47741/47743 is a self-priming, two-component, high-build, pure epoxy paint, polyamide/amine cured. Abrasion and corrosion resistant. HEMPADUR UNIQ 47743 is intended for use in cold climates down to -10°C/14°F.

HEMPADUR ZINC 15341 is a two-component polyamide cured zinc epoxy paint. It cures to a strong and corrosion resistant coating.

HEMPADUR ZINC 15341/15343 is a two-component zinc epoxy paint. It cures to a strong and corrosion resistant coating.

HEMPADUR ZINC 15360 is a two-component polyamide cured zinc-rich epoxy primer.

HEMPADUR ZINC 17340 is a two-component zinc rich epoxy paint. It cures to a strong and corrosion resistant coating.

HEMPADUR ZINC 17360 is a two-component, zinc rich epoxy primer. It cures to a hard wearing and highly weather-resistant coating. Offers cathodic protection of local mechanical damage.

HEMPALIN DANREX 52360 is a versatile, alkyd-based, economy paint with fairly good penetration into rough and porous substrate. Harmless to grain cargo.

HEMPALIN ENAMEL 52140 is a glossy alkyd enamel which forms a weather resistant coating.

HEMPALIN ENAMEL HI-BUILD 52220 is an alkyd paint, which can be applied in high film thickness by airless spray.

HEMPALIN PRIMER 12050 is a relatively quick-drying, zinc phosphate primer.

HEMPALIN PRIMER HI-BUILD 13200 is a quick-drying, urethane-modified alkyd primer.

HEMPALIN UNDERCOAT 42460 is a fairly quick-drying alkyd paint.

HEMPAQUICK ENAMEL 53840 is a quick drying alkyd enamel with good gloss and colour retention.

HEMPAQUICK PRIMER 13624 is a very quick-drying zinc phosphate pigmented alkyd primer.

HEMPASIL 77100 is a copper free, biocide free, two-component, silicone fouling release coating with a high solids content.

HEMPASIL 77300 is a biocide free, two component, silicone fouling release coating with a high solids content.

HEMPASIL 77500 is a biocide free, two-component, silicone fouling release coating with a high solids content.

HEMPASIL HELIX 77000 is a biocide free, two-component, high solids fouling release coating based on silicone.

HEMPASIL NEXUS 27302 is a high solid three component silicone based product.

HEMPASIL NEXUS X-SEAL 27600 is a flexible three component silicone based product.

HEMPASIL NEXUS X-TEND 27500 is a high solid one component silicone based tiecoat for repair and touch-up areas of existing fouling release systems.

HEMPASIL X3 is a third generation fouling release coating with high solids content.

HEMPATEX 56430 is a physically drying paint with optimum colour retention.

HEMPATEX 56432 is a physically drying paint with optimum colour retention.

HEMPATEX E.V. PRIMER 19151 is a paint based on a special resin for temporary corrosion protection of high temperature equipment.

HEMPATEX ENAMEL 56360 is a finishing coat based on acrylic resin and nonchlorinated plasticizer for optimum gloss and colour retention.

HEMPATEX HI-BUILD 46330 is based on chlorinated rubber.

HEMPATEX HI-BUILD 46370 is a physically drying high build paint with optimum colour retention. Based on acrylic resin and chlorinated plasticizer.

HEMPATEX HI-BUILD 46410 is physically drying high build paint with good colourretention as a flat finish. Based on acrylic resin and non-chlorinated plasticizer.

HEMPATEX HI-BUILD 46820 is based on acrylic resin, physically drying. Optimum colour retention.

HEMPATHANE ENAMEL 55100 is a two-component, high-gloss acrylic polyurethane enamel, cured with aliphatic isocyanate, with good gloss and colour retention.

HEMPATHANE HS 55610 is a two-component polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and colour retention.

HEMPATHANE HS 5561B is a two-component polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and colour retention.

HEMPATHANE HS 55810 is a two-component polyurethane topcoat, cured with aliphatic isocyanate, with vey good gloss and colour retention.

HEMPATHANE TOPCOAT 55210 is a two-component, glossy acrylic polyurethane coating, cured with aliphatic isocyanate, with good gloss and colour retention.

HEMPATHANE TOPCOAT 55213 is a two-component, semi-gloss acrylic polyurethane coating with good gloss and colour retention.

HEMPATHANE TOPCOAT 55910 is a two-component polyurethane topcoat, cured with aliphatic isocyanate.

HEMPAXANE CLASSIC 55000 is a two-component, high-solids, high-gloss, polysiloxane enamel with excellent gloss and colour retention.

HEMPAXANE LIGHT 55030 is a two-component, high-solids, high-gloss, polysiloxane enamel with excellent gloss and colour retention.

HEMPEL'S ACRYLIC EMULSION 58910 is a water-borne, high-grade acrylic finishing coat providing a flat finish.

HEMPEL’S ALU-PROTECT 67132 is a silicone-free oil.

HEMPEL'S ALUSAFE 7120D is a copper-free self polishing sntifouling with organic bioactive material.

HEMPEL'S ALUXTRA 71260 is a self polishing antifouling with a special copper compound and organic bioactive material.

HEMPEL'S ANTIFOULING DYNAMIC 79560 is a high solid, self-smoothening and self-polishing antifouling based on a hydrolysing silyl acrilate binder that ensures effective polishing control

HEMPEL'S ANTIFOULING DYNAMIC 79560 is a high solid, self-smoothening and self-polishing antifouling based on a hydrolysing silyl acrilate binder that ensures effective polishing control.

HEMPEL'S ANTIFOULING DYNAMIC 79580 is a high solid, self-smoothening and self-polishing antifouling based on a hydrolysing silyl acrilate binder that ensures effective polishing control.

HEMPEL’S ANTIFOULING GLOBIC 610-81960 is a tin-free, self-smoothening and self-polishing antifouling. Polishing is based on an ion exchange, resulting in a hydrolysable activated layer. An inorganic fibre reinforcement of the binder ensures effective polishing control and mechanical strength. A powerful bioactive mixture and its self-renewing effect makes it suitable for protection on deep-sea vessels.

HEMPEL’S ANTIFOULING GLOBIC NCT 8190M is a high solids, self-smoothening and self-polishing antifouling.

HEMPEL’S ANTIFOULING GLOBIC NCT 8190N is a high solids, self-smoothening and self-polishing antifouling.

HEMPEL’S ANTIFOULING OCEANIC 8195M is a high solids, self-smoothening and self-polishing antifouling. It is based on nanocapsule acrylate binder technology. Self-polishing is controlled by sea waters interaction with the core-shell structure of the nanocapsules. An inorganic fibre reinforcement ensures mechanical strength.

HEMPEL’S ANTIFOULING GLOBIC NCT 8195N is a high solids, self-smoothening and self-polishing antifouling.

HEMPEL’S ANTIFOULING GLOBIC SAP 81970 is a high solid, self-smoothening and selfpolishing antifouling.

HEMPEL’S ANTIFOULING GLOBIC SAP 8197L is a high solid, self-smoothening and selfpolishing antifouling.

HEMPEL’S ANTIFOULING OCEANIC 8490K is a high solids, tin-free, self-smoothening and self-polishing antifouling.

HEMPEL’S ANTIFOULING OCEANIC 8495K is a high solids, tin-free, self-smoothening and self-polishing antifouling.

HEMPEL’S ANTIFOULING OLYMPIC 86900 is a high solid, tin-free, self-polishing antifouling.

HEMPEL’S ANTIFOULING OLYMPIC 86950 is a high solid, tin-free, self-polishing antifouling.

HEMPEL’S ANTIFOULING OLYMPIC FB 8695B is a tin-free, self-polishing antifouling.

HEMPEL'S ANTIFOULING PRIMER 26050 is a physically drying paint dissolved in mineral spirit.

HEMPEL’S ANTI-SLINT 67500 is flame dried silica sand of which the average particle size is approximately 0.5 millimetres.

HEMPEL’S ANTI-SLIP PEARLS 67420 are hollow, aluminium silicate spheres (“glass pearls”) of diameters between 5 and 300 micron.

HEMPEL'S ANTI-CLIP PEARLD 67423 is small hollow glass beads.

HEMPEL'S BARNACLE REMOVER 69027 is an acid containing product for easy removal of barnacles by dissolving them. The product works by a combination of mechanical and chemical treatment.

HEMPEL'S BASIC 76111 is a traditional antifouling (soluble matrix) based on cuprous oxide.

HEMPEL'S BILGE & LOCKER PAINT 5112B is an alkyd based enamel. It has a good brush-ability and a good water and oil resistance for bilges and lockers. Not suitable for permanent immersion.

HEMPEL'S BILGE CLEANER 69004 is a high strength cleaner and emulsifier which leave the bilge clean and fresh with a nice fresh citrus odor.

HEMPEL’S BOAT SHAMPOO 67284 is a concentrated solvent-free cleaner.

HEMPEL’S CLASSIC VARNISH is an air-drying, clear alkyd varnish with tung oil. It has good resistance to seawater, sunlight and adverse weather conditions.

HEMPEL'S CLEAN & SHINE 69003 is a concentrated wash and wax that cleans and leaves a protective film in one application.

HEMPEL'S CLEAN & SHINE SPRAY 69002 is a concentrated wash and wax that cleans and leaves a protective coating in one application. The water hose connector makes the product very easy to use and allows the controlled mix ratio of water and HEMPEL'S CLEAN & SHINE SPRAY 69002.

HEMPEL'S CONTRACT EMULSION 58410 is an economic, water-borne, acrylic, decorative coating, which has a flat and smooth finish.

HEMPEL'S MILLE PERFORMER 7110H is a self polishing antifouling based on cuprous oxide.

HEMPEL'S CUSTOM MARINE POLISH 67445 is a liquid cleaning polish.

HEMPEL'S DECOLAY 67490 is a water-based, deck covering. It has good resistance to wear and seawater.

HEMPEL'S DEGREASER 99611 is a cleaning agent based on a mixture of solvents.

HEMPEL’S DURA-GLOSS VARNISH 02020 is a quick-drying, clear urethane alkyd varnish. It has good resistance to seawater, sunlight and adverse weather conditions.

HEMPEL'S DURA-SATIN VARNISH 02040 is a quick-drying, silk gloss urethane alkyd varnish. It has good resistance to seawater, sunlight and adverse weather conditions. The quality is related to HEMPEL'S DURA-GLOSS VARNISH but with a silk gloss finish.

HEMPADUR FILLER 35250 is a two-component, solvent-free, epoxy filler, which when fully cured - is resistant to water, aliphatic hydrocarbons, and related products.

HEMPEL’S FAVOURITE VARNISH 01250 is an air-drying, clear urethane alkyd varnish. It has good resistance to seawater, sunlight and adverse weather conditions.

HEMPEL'S FLAT EMULSION 58710 is a water-borne, acrylic-based quality coating. It complies with SASO's Standard for exterior emulsion paints (470-1986) and Federal Standard (TT-P-29).

HEMPEL’S GALVOSIL 15700 is a two-component, solvent-borne, self-curing, inorganic zinc silicate with outstanding resistance against weathering and abrasion.

HEMPEL’S GALVOSIL 15780 is a two-component, medium-zinc, solvent-borne, selfcuring inorganic zinc silicate coating. Applicable by airless spray.

HEMPEL’S HS GAS PIPE COATING 85442 is a two-component epoxy polyamine cured coating.

HEMPEL’S HS GAS PIPE COATING 87633 is a two-component epoxy polyamine cured coating.

HEMPEL'S GELCOAT CLEANING GEL 69017 is a strong, high efficient, non-abrasive cleaning gel.

HEMPEL'S GELCOAT CLEANING POWDER 67536 is a strong, fine abrasive cleaning powder for tough stains.

HEMPEL'S GELCOAT CLEANING SPRAY 69007 is an easy to use, foaming cleaner spray.

HEMPEL'S GLASS FIBRE REPAIR KIT is based on a low viscosity, unsaturated polyester and is especially suited for all kinds of lamination work in connection with glass fibre.

HEMPEL'S GLIDE CRUISE 7110G is a self polishing antifouling containing PTFE for a more smooth surface reducing friction.

HEMPEL'S GLIDE CRUISE 7170G is a self polisging antifouling containning PTFE for a more smooth surface reducing friction.

HEMPEL'S GLIDE SPEED 7142G is a hard antifouling (insoluble matrix) containing PTFE for a more smooth surface reducing friction.

HEMPEL'S GLIDE SPEED 7142T is a hard antifouling (insoluble matrix) containing PTFE for a more smooth sufrace reducing friction.

HEMPEL'S GLIDE SPEED 7648G is an acrylic-based hard antifouling (insoluble matrix), with PTFE for a more smooth surface reducing friction.

HEMPEL'S GLIDE SPEED WHITE 7630D is a hard antifouling (insoluble matrix) containing PTFE for a more smooth surface reducing friction.

HEMPEL'S GREY METALLIC 12030 is a conventional primer, containing aluminium flakes which gives excellent water repelling properties.

HEMPEL'S HARD RACING 7142H is a hard antifouling (insoluble matrix) based on cuprous oxide.

HEMPEL'S HARD RACING 76484 is an acrylic-based hard antifouling (insoluble matrix), with a high content of cuprous oxide and organic bioactive material.

HEMPEL'S HARD RACING WHITE 76300 is a hard antifouling (insoluble matrix) containing cuprous compounds and organic bioactive material.

HEMPEL'S HARD RACING XTRA 71420 is a cuprous oxide based hard antifouling (insoluble matrix) designed with a low leaching of copper.

HEMPEL'S HIGH PROTECT 35651 is a two-component amine adduct cured solvent-free epoxy high build primer. It forms a hard, tough and water-resistant coating.

HEMPEL'S HI-VEE 56540 is a non-hiding, but strongly day-light reflecting acrylic paint with fluorescent pigments which give intense colour impression and high visibility (HIVEE).

HEMPEL'S HI-VEE LACQUER 06520 is a non-yellowing, clear varnish.

HEMPEL’S IMPREG 2 is a quick-drying, clear urethane alkyd varnish. It has good resistance to seawater, sunlight and adverse weather conditions.

HEMPEL'S LIGHT PRIMER 45551 is a two-component polyamide adduct cured epoxy high build paint.

HEMPEL'S PRIMER/SEALER 28830 is a pigmented water-borne primer/sealer with excellent sealing and binding properties.

HEMPEL’S MAHOGANY COLOUR 09600 is a solution of light stable pigments.

HEMPEL’S MARINE VARNISH 02220 is a quick-drying clear urethane alkyd varnish.

HEMPEL'S METALLIC PAINT 52410 is a superior alkyd topcoat.

HEMPEL'S MILLE DYNAMIC 71704 is a self polishing antifouling containing a combination of cuprous oxide and organic, bioactive material.

HEMPEL'S MILLE LIGHT 71400 is an erodable bottom paint.

HEMPEL'S MILLE BALTIC 71850 is an economic, erodable copper free bottom paiint. It changes to a final, bright colour after approximately 1 week exposure to water.

HEMPEL'S MILLE STANDARD WHITE 71450 is a self-polishing antifouling containing copper. Due to its self-renewing effect this product maintains an effective bioactive surface during its entire service life.

HEMPEL'S MILLE ULTIMATE 2 71102 is a one component cuprous oxide based self polishing antifouling with extra activator designed with a low leaching of copper.

HEMPEL'S MILLE ULTIMATE 71702 is a self polisging antifouling containning a combination of cuprous oxide and organic, bioactive material.

HEMPEL'S MILLE WHITE SE 71600 is a self-polishing antifouling based on a combination of cuprous compounds and organic bioactive material.

HEMPEL'S MILLE XTRA 71100 is a cuprous oxide based self polishing antifouling designed with a low leaching of copper.

HEMPEL’S MULTICOAT 51120 is an alkyd based enamel which forms a weather resistant coating. It has a good brush-ability and is resistant to sunlight, salt water, spillage of mineral oil.

HEMPEL'S OCEAN PERFORMER 7110E is a two pack self polishing antifouling based on biocide and cuprous oxide.

HEMPEL'S PAINT STRIPPER 99540 is a highly effective solvent based paint stripper.

HEMPEL’S POLYESTER GF 35920 is a high solid, two-component heavy duty lining system based on isophthalic polyester acrylic copolymer reinforced with glass flakes.

HEMPEL'S PRE-CLEAN 67602 is a high strength cleaner and degreaser.

HEMPEL'S PRIMER UNDERCOAT 13201 is a quick-drying, urethane-modified alkyd primer with zinc phosphate pigments.

HEMPEL'S PRO ACRYLIC 55880 is a two-component, isocyanate-free, acrylic finishing coat with good gloss and colour retention.

HEMPEL'S ProBond 45184 is a two-component low-temperature epoxy "tie coat" coating.

HEMPEL'S ProBuild 45810 is a two component, low VOC epoxy spray applied fairing surfacer.

HEMPEL'S ProEnamel Satin is a two-component, semi-gloss acrylic polyurethane coating, with good colour retention.

HEMPEL'S ProFair 35290 is a light weight two-component, epoxy filler, featuring high adhesion and water resistance, when fully cured is easy to sand.

HEMPEL'S ProFiller 35370 is a two-component, lightweight epoxy filler, featuring high adhesion and water resistance, when fully cured is wasy to sand.

HEMPEL'S ProPromer 45602 is a multi-purpouse hi-build epoxy primer which cures to a hard tough coating with a good resistance to abrasion and seawater.

HEMPEL'S ProPrimer HS 45884 is a high solids, hi-build epoxy primer, with good surface tolerance and forms a hard and tough coating.

HEMPEL'S ProPrimer LT 45554 is a light epoxy primer which cures to a tough water resistant coating, that is easy to sand.

HEMPEL'S ProThinners, as indicated on the product data sheets may be added to obtain a consistency most suitable for aplication.

HEMPEL'S ProThinners, as indicated on the product data sheets may be added to obtain a consistency most suitable for aplication. As a general rule, thinning should be kept to a minimum, as the quality of the coating will suffer from excessive thinning.

HEMPEL'S RACING LIGHT 71350 is an erodable bottom paint. It changes to final colour after approximately 1 week of exposure to water.

HEMPEL'S RIB CLEANER 99351is a powerful, concentrated solvent-free cleaner and degreaser.

HEMPEL'S ROOF COATING 58810 is a high-build acrylic coating.

HEMPEL'S RUBBING LIQUID 69021 is a fine abrasive rubbing compound.

HEMPEL'S SEATECH ANTIFOULING 7820D is a water-borne, self polishing antifouling based on cuprous oxide.

HEMPEL'S SEATECH GLOSS VARNISH 09700 is a fast drying, one component water-borne acrylic gloss varnish with very high outdoor resistance. Contains UV filters.

HEMPEL'S SEATECH PRIMER 18502 is a water-borne two-component polyamine cured epoxy primer.

HEMPEL'S SEATECH SATIN VARNISH 09710 is a fast drying, one component water-borne acrylic satin varnish with very high outdoor resistance. Contains UV filters.

HEMPEL’S SHOPPRIMER E 15280 is a two-component epoxy primer, pigmented with zincphosphate rust-inhibiting pigments. It is designed for automatic spray application as well as manual application.

HEMPEL’S SHOPPRIMER ZS 15820 is a two-component, low-zinc, solvent-borne ethyl silicate shopprimer, designed for automatic spray application.

HEMPEL’S SHOPPRIMER ZS 15890 is a two-component, solvent-borne zinc ethyl silicate shopprimer, designed for automatic spray application.

HEMPEL’S SILICONE ACRYLIC 56940 is a heat resistant acrylic modified polysiloxane paint.

HEMPEL’S SILICONE ALUMINIUM 56910 is a heat resistant aluminium pigmented polysiloxane paint.

HEMPEL'S SILICONE ALUMINIUM 56914 is a heat resistant aluminium pigmented polysiloxane paint.

HEMPEL’S SILICONE TOPCOAT 56900 is a heat resistant polysiloxane paint, pigmented with inert pigments.

HEMPEL’S SILICONE ZINC 16900 is a heat resistant zinc pigmented silicone primer.

HEMPEL'S SILVIUM 51570 is an oleoresinous general purpose aluminium paint with good light reflection.

HEMPEL'S MILLE STANDARD 71750 is a self-polishing antifouling containing copper. Due to its selfrenewing effect this product maintains an effective bioactive surface during its entire service life.

HEMPEL’S SUPERYACHT GLOBIC NCT 8990S is a high solids, self-polishing antifouling.

HEMPEL'S TEAK CLEANER 67543 is a cleaning powder for teak. Harmless to glass fibre, painted or varnished surfaces. Avoid contact with stainless steel.

HEMPEL'S TEAK COLOUR RESTORER 67462 is a pigmented wood oil containing antimould agents to prevent discolouration.

HEMPEL'S TEAK OIL 67571 is based on alkyd resin and drying oils with low viscosity.

HEMPEL’S TEXTILE PROTECT 06851 is a transparent water proofing protection for exterior fabrics.

HEMPEL'S TIGER XTRA 71000 is a conventional antifouling (insoluble matrix) with a high content of cuprous oxide.

HEMPEL’S TOOL CLEANER 99610 is a blend of strong solvents for cleaning of tools that have been used for mixing or application of two-component epoxy products.

HEMPEL'S ACRYLIC PRIMER/SEALER 26630 is a solvent-borne alkali resistant acrylic primer/sealer with excellent penetration and dust binding properties.

HEMPEL'S UNDERWATER PRIMER 26030 is a physically drying paint dissolved in mineral spirit and pigmented with aluminium flakes.

HEMPEL'S UNIFILLER 67583 is a quick drying styrene alkyd based filler.

HEMPEL’S UNI-PRIMER 13140 is a quick-drying, one-component primer with rust-inhibiting pigments.

HEMPEL’S VINYL ESTER GF 35910 is a two component cold cured vinyl ester/acrylic copolymer, reinforced with glass flakes. Applicable in thick coats by standard heavy duty airless spray equipment.

HEMPEL'S VINYL SHINE 69031 is an easy to use liquid gel, to condition and leave a protective layer on external and internal vinyl and rubber surfaces.

HEMPEL'S Waterborne degreaser 68980 is a surface cleaner based on a mixture of water and solvents.

HEMPEL'S WATER GLIDE 74500 is a fast drying, thin-film antifouling product containing high amount of copper and TecCel which assures a smooth surface reducing the friction for maximum speed. It is an ideal product for yachting (regatta). It is possible to launch shortly after painting.

HEMPEL'S WAX 69033 is a liquid wax for UV protection and a high gloss durable finish.

HEMPEL'S WAX TecCel 69034 is a high performance liquid wax with TecCel technology providing a long lasting, deep gloss finish with excellent protection. TecCel is the mark of HEMPEL'S advanced performance coatings, containing polytetrafluorethylene, giving significant improvements in performance.

TRATAMENTO FONDO 02350 is a transparent wood preservative based on modified alkyd.

HEMPEL'S WOOD STAIN 02450 is a durable modified alkyd-based wood stain for protection of all types of wood.

HEMPEL’S ZINC PRIMER 16490 is a one-component, high molecular weight, quick drying, phenoxy coating with a high content of zinc.

HEMPINOL 10220 is a physically drying, high-build, bituminous coating.

HEMUCRYL 48130 is a water-borne paint based on acrylic dispersion with good anticorrosive properties.

HEMUCRYL BRUSH AGENT 99810 is a water-borne compound containing a flow-improving thickener.

HEMUCRYL ENAMEL 58040 is a water-borne, selfcross-linking acrylic dispersion based paint.

HEMUCRYL ENAMEL HI-BUILD 58030 is a water-borne, acrylic dispersion based paint.

HEMUCRYL PRIMER HI-BUILD 18032 is a water-borne, acrylic dispersion paint with good anticorrosive properties. Especially suited for application by airless spray.

HEMUCRYL TI-COAT 18200 is a water-borne acrylic dispersion paint with good adhesive properties.

HEMUCRYL TOPCOAT HI-BUILD 58230 is a water-borne, acrylic dispersion based paint.

HEMUDUR 18500 is a water-borne two-component polyamine cured epoxy primer containing zinc phosphate as corrosion inhibiting pigment. It cures to a strong and rust-preventing coat.